Mf-digital Windows XP - Setting Up A Hyperterminal Connection Manual de usuario descargar pdf (Pagina 2)

4. Now you will be prompted to select the Port Settings Properties. Click the Restore Defaults Button and click

OK.

5 You will now be in Hyperterminal with a blinking cursor.

Turn on CAPS LOCK.

6 In Hyperterminal, go to File-> Properties-> Click on the

Settings tab and then click the ASCII Setup button.

7 Change the Line Delay to 50 milliseconds and the

Character Delay to 10 milliseconds and click OK and

then Click OK to get back to the Hyperterminal screen.

8 Use a single letter command to begin troubleshooting the

duplicator.

List of commands:

Drives and Prism PLUS printer.

A - Accept a disc form an open tray fig. 5

I - Insert a disc in an open tray

J - Hovers above an open tray

G - Get a disc from an open tray

OptiEC, EC PRO & Picojet 6000

W - Hovers a disc above an open OptiEC tray

O - Inserts a disc in an open OptiEC tray

U - Accepts a disc from an open OptiEC tray

N - Gets a disc from an open OptiEC tray

1 – Close the printer tray

2 – Open the printer tray

3 – Check status of the printer.

Status of the printer:

C0 – Error time out (busy state)

C1 – Bad connection between the loader and printer.

C2 – Open tray.

C3 – Closed tray without a CD.

C4 - Closed tray with a CD.

C - Calibrate loader or clear error status

S - Check loader status, check error (hex)

Crtl+C - Stops execution of a command

1 2 3

Sin comentarios

Mf-digital Windows XP - Setting Up A Hyperterminal Connection Manual de usuario Pagina 2